From: Ral on 02/24/2002
My system crashes when I close the IBM PC Camera software with an OE page fault VXD MXECPV(02)+000002CC 0028:C1902CAC. Other than that it runs fine. I've reinstalled the camera software and Windows 98SE. I've downloaded and installed the latest drivers from IBMPCCAMERA. I've sent questions to their tech support but they don't respond. Any ideas?
| |
Votes:
Rating: 0
Delete: 0
|
|
--- Replies to this Problem ---
From: larry on 02/04/2003
to scott thank you thank you thank you 100 times over. i to was having this problem and also running crash proof. i disabled it like you said problem solved. thanks again scott your a god.
| |
Votes:
Rating: 0
Delete: 0
|
|
From: Scott on 01/01/2003
I have too recently been getting this message. Turns out to be an issue with some newly installed software. I recently purchased the Fix-It Utilities and was running CRASHPROOF! This was the culprit of my problems!! I just disabled CRASHPROOF and rebooted fresh. ALL HAS BEEN WELL SINCE!!! To clarify, I am still running Fix-It, but not allowing it to prevent what it actually was causing... CRASHES!!!I hope this is your issue as well, as I can relate to the frustrations I have read from some of you.
| |
Votes:
Rating: 0
Delete: 0
|
|
From: kurt on 08/01/2002
I'm getting the same error "Fatal Exception OE VXD MXECPV(02)" only in 0028:C198OAE1. I installed an HP Deskjet 932c with a USB connector and it prints, then crashes with these blue screen errors and then reboots my computer.I have to this crash,i'l buy the Deskjet 930C and have the same shit.. Oooops i'm angry and mad on those people!!! I could say, DON'T BUY enything more FROM HP If they don't replay you'r questions on the softw
then they have to lose some customers. punish that people, and tell enyone abaut the BAD
SERVICE from HP !!!!!!!!!!!!!! say it to the world.
| |
Votes:
Rating: 0
Delete: 0
|
|
From: Colleen on 05/07/2002
: HP sent me a really long email on how to fix this. Email me at winnipeggal@skyweb.ca if you would like a copy of it. It doesn't all fit here. Thanks: My system crashes when I close the IBM PC Camera software with an OE page fault VXD MXECPV(02)+000002CC 0028:C1902CAC. Other than that it runs fine. I've reinstalled the camera software and Windows 98SE. I've downloaded and installed the latest drivers from IBMPCCAMERA. I've sent questions to their tech support but they don't respond. Any ideas?
| |
Votes:
Rating: 0
Delete: 0
|
|
From: David on 04/25/2002
I get the same error after installing an HP DeskJet 950c. I have Windows 98SE and system suite installed. I too have tried reinstalling several times and My computer still crashes right when the printer finishes.: Argh, I'm getting the same error "Fatal Exception OE VXD MXECPV(02)" only in 0028:C198OAE1. I installed an HP Deskjet 932c with a USB connector and it prints, then crashes with these blue screen errors and then reboots my computer. It works with the parallel cord, but I would like to use the USB. I'm not sure what to do, HP was useless. I have followed the uninstall, reinstall several times now. Any thoughts, ideas, experience, would be helpful, pleez. :
: : I am getting this same irritating error trying to install a Sony Memory Stick adapter. SystemSuite has a viewer that lets me see all running programs. The MX designated programs are associated with SystemSuite itself and annoyingly, I think SystemSuite's crash protection module may be the MXECPV program!! So much for crash protection. : : : I get a similar error when I fry to disconnect from my dial up account MXECPV (02) =000002FI Error OE: 0028:C18A6401 with Windows ME. : : : : My system crashes when I close the IBM PC Camera software with an OE page fault VXD MXECPV(02)+000002CC 0028:C1902CAC. Other than that it runs fine. I've reinstalled the camera software and Windows 98SE. I've downloaded and installed the latest drivers from IBMPCCAMERA. I've sent questions to their tech support but they don't respond. Any ideas?
| |
Votes:
Rating: 0
Delete: 0
|
|
From: David on 04/25/2002
I disabled crashproof and error tracking in SystemSuite and so far this has resolved my printing problem. No more BSOD with the MXECPV error.: I get the same error after installing an HP DeskJet 950c. I have Windows 98SE and system suite installed. I too have tried reinstalling several times and My computer still crashes right when the printer finishes. : : Argh, I'm getting the same error "Fatal Exception OE VXD MXECPV(02)" only in 0028:C198OAE1. I installed an HP Deskjet 932c with a USB connector and it prints, then crashes with these blue screen errors and then reboots my computer. It works with the parallel cord, but I would like to use the USB. I'm not sure what to do, HP was useless. I have followed the uninstall, reinstall several times now. Any thoughts, ideas, experience, would be helpful, pleez. : :
: : : I am getting this same irritating error trying to install a Sony Memory Stick adapter. SystemSuite has a viewer that lets me see all running programs. The MX designated programs are associated with SystemSuite itself and annoyingly, I think SystemSuite's crash protection module may be the MXECPV program!! So much for crash protection. : : : : I get a similar error when I fry to disconnect from my dial up account MXECPV (02) =000002FI Error OE: 0028:C18A6401 with Windows ME. : : : : : My system crashes when I close the IBM PC Camera software with an OE page fault VXD MXECPV(02)+000002CC 0028:C1902CAC. Other than that it runs fine. I've reinstalled the camera software and Windows 98SE. I've downloaded and installed the latest drivers from IBMPCCAMERA. I've sent questions to their tech support but they don't respond. Any ideas?
| |
Votes:
Rating: 0
Delete: 0
|
|
From: Donna on 04/17/2002
Argh, I'm getting the same error "Fatal Exception OE VXD MXECPV(02)" only in 0028:C198OAE1. I installed an HP Deskjet 932c with a USB connector and it prints, then crashes with these blue screen errors and then reboots my computer. It works with the parallel cord, but I would like to use the USB. I'm not sure what to do, HP was useless. I have followed the uninstall, reinstall several times now. Any thoughts, ideas, experience, would be helpful, pleez.
: I am getting this same irritating error trying to install a Sony Memory Stick adapter. SystemSuite has a viewer that lets me see all running programs. The MX designated programs are associated with SystemSuite itself and annoyingly, I think SystemSuite's crash protection module may be the MXECPV program!! So much for crash protection.
: : I get a similar error when I fry to disconnect from my dial up account MXECPV (02) =000002FI Error OE: 0028:C18A6401 with Windows ME. : : : My system crashes when I close the IBM PC Camera software with an OE page fault VXD MXECPV(02)+000002CC 0028:C1902CAC. Other than that it runs fine. I've reinstalled the camera software and Windows 98SE. I've downloaded and installed the latest drivers from IBMPCCAMERA. I've sent questions to their tech support but they don't respond. Any ideas?
| |
Votes:
Rating: 0
Delete: 0
|
|
From: Todd on 04/14/2002
I am getting this same irritating error trying to install a Sony Memory Stick adapter. SystemSuite has a viewer that lets me see all running programs. The MX designated programs are associated with SystemSuite itself and annoyingly, I think SystemSuite's crash protection module may be the MXECPV program!! So much for crash protection. : I get a similar error when I fry to disconnect from my dial up account MXECPV (02) =000002FI Error OE: 0028:C18A6401 with Windows ME. : : My system crashes when I close the IBM PC Camera software with an OE page fault VXD MXECPV(02)+000002CC 0028:C1902CAC. Other than that it runs fine. I've reinstalled the camera software and Windows 98SE. I've downloaded and installed the latest drivers from IBMPCCAMERA. I've sent questions to their tech support but they don't respond. Any ideas?
| |
Votes:
Rating: 0
Delete: 0
|
|
From: GP on 04/09/2002
I get a similar error when I fry to disconnect from my dial up account MXECPV (02) =000002FI Error OE: 0028:C18A6401 with Windows ME.: My system crashes when I close the IBM PC Camera software with an OE page fault VXD MXECPV(02)+000002CC 0028:C1902CAC. Other than that it runs fine. I've reinstalled the camera software and Windows 98SE. I've downloaded and installed the latest drivers from IBMPCCAMERA. I've sent questions to their tech support but they don't respond. Any ideas?
| |
Votes:
Rating: 0
Delete: 0
|
|
|
