|
Error at 0E:0197 in Normal Mode and 0E:0167 in Saf |
Post a Reply |
From: Scottie Okrap on 03/27/2003
I went to reboot my pc and it came back with an error in OE:0197:82EEE930 message, so I went to start it in Safe Mode and it came back with an 0E:0167:82EEE930 message. It says hit any key to contine or the alt ctrl del to restart. When I hit a key it says "windows protection error" and tells me to restart. So I try again and nothing. I messed with the step by step configuration but of course no luck there. So I am stuck in this vicious circle of restarts. Please, any suggestions would be greatly appreciated
| |
Votes:
Rating: 0
Delete: 0
|
|
--- Replies to this Problem ---
From: slink on 03/30/2003
this windows protection error is robably refering to a driver, best way to solve it is to do a selective boot with the F8 key, goto safemode then when you press enter to boot under safemode press f8 again straight away and choose step by step configuration, say yes to all exept the device drivers, you should get access to the computer.When you are at the windows desktop go o the device manager and remove any drivers for networking and other devices that use the pci slots. Don't remove any other drivers like the computers main chipsets and hard drive/floppy drive drivers just any networking or pci slot drivers... , make sur you have your driver CD's with you incase re-installing the drivers is needed via your CD roms Reboot he pc normally when you have removed all the devices from the pc and be ready to re-install drivers if windows needs you to do so, see if this helps. You can disable a driver to if this does not work, by doing this it won't load during boot process... Slink
| |
Votes:
Rating: 0
Delete: 0
|
|
|
